FEATURES OF THE LIFE CYCLE PROCESSES OF THE SOFTWARE FOR MEASURING EQUIPMENT

Keywords: software, life cycle, measuring equipment, testing, quality assessment.

Abstract

The article presents the results of comparative analysis to establish the main components of the software life cycle for measuring instruments (MI). Both basic international software engineering standards and specific international and regional documents for MI software were used for these studies. The results of the comparative analysis of the software life cycles for the MI allow both the developer of such software and its customer or consumer to focus on the most important stages for this software.

The peculiarity of the MI software is that the result of the adoption of such software is a successfully tested MI, the software of which is a component of this MI. MI software testing is a component of acceptance tests of the MI itself, as a result of which this MI is accepted. Only upon successful completion of all necessary inspections of MI software can it be stated that the overall quality assessment of MI software has been completed.

Consideration of specific software requirements for MIs is extremely important at such stages of the life cycle as the processes of system requirements analysis, software requirements analysis and software suitability testing. At the stage of formation of requirements for MI software, not only the general requirements for MI software (built into MI, installed on universal computers), but also specific requirements for the components of such software should be taken into account. For MI software, it is necessary to establish the level of division of software into legally significant and other parts, the degree of verification of software reading, storage devices and data transmission devices.

Downloads

Download data is not yet available.

| Abstract views: 725 | PDF Downloads: 304 |

References

ISO/IEC/IEEE 12207:2017. Systems and software engineering. Software life cycle processes. [Valid from 2017-11-01]. ISO/IEC/IEEE, 2017. 145 р.

Lavrishcheva К. М. Programna inzheneriya pidruchnyk. Кyiv: NAN Ukrayiny, 2008. 319 p.

DSTU ISO/IEC/IEEE 12207:2018. In-zheneriya system і programnyh zasobiv. Protcesy zhyttyevogo tsyklu programnyh zasobiv. (ISO/IEC/IEEE 12207:2017, IDT). [Chynnuy vid 2018-08-15]. Vyd. оfits. Кyiv, 2018. 145 p.

ISO/IEC 14764:2006. Software Engineering. Software Life Cycle Processes. Maintenance. [Valid from 2006-09-01]. ISO/IEC, 2006. 44 р.

DSTU ISO/IEC 14764:2014. Inzheneriya programnogo zabezpechennya. Protsesy zhyt-tyevogo tsyklu programnogo zabezpechennya. Теkhnichne оbslugovuvannya (ISO/IEC 14764:2006, IDT) [Chynnuy vid 2016-01-01]. Vyd. оfits. Кyiv, 2016. 45 p.

Patsey N. V., Shyman D. V., Suhoruko-va I. G. Теkhnologiya razrabotki programmnogo оbespecheniya: ucheb.-method. posobiye. Мinsk: BGTU, 2011. 130 p.

Коrotun Т. М. Modeli і methody tastuvannya programnyh system. Problemy programuvannya. 2007. № 2. P. 76–84.

Velychko О. М., Hrabovskyi О. V., Gor-diyenko Т. B. Оsoblyvosti zastosuvannya V-modeli pry rozroblenni ta otsinyuvanni yakosti programnogo zabezpechennya zasobiv vymiryuvalnoyi tekhniky // Zbirnyk naukovykh prats ODATRYA. 2019. Vyp. 1 (14). P. 6–11.

Velychko О. М., Hrabovskyi О. V., Gor-diyenko Т. B. Оsoblyvosti zastosuvannya spiralnoyi modeli dlya vyprobuvan programnogo zabezpechennya zasobiv vymiryuvalnoyi tekhniky // Zbirnyk naukovykh prats ODATRYA. 2019. Vup. 2 (15). P. 42–49.

Velychko O., Gordiyenko T., Hrabovskyi O. Testing of measurement instrument software on the national level // Eastern-European Journal of Enterprise Technologies. Information and controlling systems. 2018. № 2/9 (92).

Velychko O., Gaman V., Gordiyenko T., Hrabovskyi O. Testing of measurement instrument software with the purpose of conformity assessment // Eastern-European Journal of Enterprise Technologies. Information and controlling systems. – 2019. – № 1/9 (97).

Velychko O., Hrabovskyi O., Gordiyen-ko T. Peculiarities of Testing of Measurement Instrument Software in Ukraine // Sensors and Electronics Instrumentation Advances: Proceedings of the 5th International Conference on Sensors Engineering and Electronics Instrumentation Advances (SEIA’ 2019), 25-27 September 2019, Adaje, Canary Islands (Tenerife), Spain. P. 241–243.

OIML D 31:2008. General Requirements for Software Controlled Measuring Instruments. OIML. Paris, 2008. 53 р.

WELMEC 7.1. Informative Document: Development of Software Requirements. WELMEC, 2005. 47 р.

WELMEC 7.2. Software Guide (Measur-ing Instruments Directive 2014/32/EC). WELMEC, 2019. 132 р.

WELMEC 2.3. Guide for Examining Software (Non-automatic Weighing Instruments). WELMEC, 2005. 23 р.

COOMET R/LM/10:2004. COOMET Recommendation: Software for Measuring Instru-ments: General Technical Specifications. COOMET. 2004. 10 p.

ISO/IEC/IEEE 24748-1:2018. Systems and software engineering. Life cycle management. Part 1: Guidelines for life cycle management. [Valid from 2018-11-01]. ISO/IEC/IEEE, 2018. 72 р.

DSTU ISO/IEC TS 24748-1:2018. In-zheneriya system і programnyh zasobiv. Кеruvannya zhyttyevym tsyklom. Chastyna 1. Nastanovy shchodo kеruvannya zhyttyevym tsyklom. (ISO/IEC TS 24748-1:2018, IDT). [Chynnuy vid 2018-08-15]. Vyd. оfits. Кyiv, 2018. 72 p.

ISO/IEC/IEEE 24748-3:2011. Systems and software engineering. Life cycle management. Part 3: Guide to the application of ISO/IEC 12207 (Software life cycle processes). [Valid from 2011-09-01]. ISO/IEC/IEEE, 2011. 111 р.

DSTU ISO/IEC TR 24748-3:2016. In-zheneriya system і programnogo zabezpechennya. Кеruvannya zhyttyevym tsyklom. Chastyna 3. Nastanovy shchodo zastosuvannya ISO/IEC 12207 (Protsesy zhyttyevogo tsyklu programnogo zab-ezpechennya). (ISO/IEC TR 24748-3:2011, IDT). [Chynnuy vid 2018-01-01]. Vyd. оfits. Кyiv, 2016. 91 p.

SWEBOK. Guide to the Software Engi-neering Body of Knowledge. Version 3.0. IEEE Computer Society, 2014. 335 p.

ISO/IEC/IEEE 15288: 2015. Systems and software engineering. System life cycle processes. [Valid from 2015-05-01]. ISO/IEC/IEEE, 2015. 108 р.

DSTU ISO/IEC/IEEE 15288:2016. In-zheneriya system і programnogo zabezpechennya. Protsesy zhyttyevogo tsyklu system. (ISO/IEC/IEEE 15288:2015, IDT). [Chynnuy vid 2018-01-01]. Vyd. оfits. Кyiv, 2018. 90 p.

Bahtizin V. V., Gluhova L. А. Tehnologiya razrabotki programmnogo obespecheniya: ucheb. posobiye. Мinsk: BGUIR, 2010. 267 p.

Software Development Methodology Today. Software Development Strategies and Life-Cycle Models. URL: http://www.informit.com/articles/article.aspx?p=605374&seqNum=2

Braude E. Tehnologiya razrabotki pro-grammnogo obespecheniya. SPb.: Piter, 2004. 655 p.

Published
2020-12-28
How to Cite
[1]
O. M. Velychko, O. V. Hrabovskiy, and T. B. Gordiyenko, “FEATURES OF THE LIFE CYCLE PROCESSES OF THE SOFTWARE FOR MEASURING EQUIPMENT”, Збірник наукових праць Одеської державної академії технічного регулювання та якості, no. 2(17), pp. 37-45, Dec. 2020.

Most read articles by the same author(s)

1 2 > >>